NDT Inspection Fujairah Port — Ships / Vessels

AIMMS Group provides ABS, DNV, and IRS approved NDT inspection services in Fujairah — one of the world’s busiest ship anchorage and bunkering ports. Our certified inspectors mobilize to vessels at anchor in the Fujairah outer anchorage, at the port alongside, and at the Fujairah Marine & Bunkering Zone (FMANZ) — typically within 24 hours of enquiry. 

Whether your vessel requires routine class survey NDT, urgent pre-purchase inspection, or emergency weld or hull assessment, our team delivers fast, accurate, and fully documented results accepted by all IACS member classification societies. 

NDT Services Available in Fujairah 

Ultrasonic Thickness Gauging (UTG) — Ship Hull & Structural Members 

AIMMS Group carries out UTG inspections on all vessel types at Fujairah anchorage. Our ASNT Level II certified technicians use calibrated digital UTG instruments to measure hull plate, deck plate, bulkhead, and structural member thickness — providing full close-up survey (CUS) data in the format required by ABS, DNV, LR, BV, IRS,  NK,RINA and TASNEEF 

• Hull plate thickness surveys for class renewal  

• Structural member gauging — frames, longitudinal, web frames  

• Deck plating and hatch coaming measurement  

• Ballast tank and void space surveys  

• Pre-purchase / condition survey UTG  

Magnetic Particle Inspection (MPI) — Welds & Critical Joints 

Our MPI service in Fujairah detects surface and near-surface crack defects in ferromagnetic components. Approved for use under ABS, DNV, and IRS class survey requirements. 

• Weld seam and heat-affected zone inspection  

• Anchor chain link and windlass inspection  

• Rudder pintle and shaft inspection  

• Offshore crane and lifting gear certification inspection  

Ultrasonic Testing (UT) — Weld & Volumetric Inspection 

Phased array and conventional UT for volumetric weld examination, detecting internal defects in structural welds, pressure vessels, and piping systems onboard vessels  anchored at Fujairah. 

Vacuum Box Testing — Hull Weld Tightness 

Rapid tightness testing of hull shell plating welds, tank top welds, and bulkhead welds. Fully acceptable under IACS class survey requirements. Mobilize to ship at anchorage same day. 

Dye Penetrant Testing (DPT) 

Surface-breaking defect detection for non-magnetic materials including stainless steel, aluminum, and bronze components — propeller blades, shaft couplings, and non-ferrous fittings. 

Vessel Types We Inspect at Fujairah 

Vessel Type — Common NDT Services Required 

• Crude Oil & Product Tankers — UTG hull survey, vacuum box testing, MPI weld inspection  

• Bulk Carriers — UTG close-up survey, hold coating inspection, MPI frames  

• Container Vessels — Hatch cover testing, UTG deck & hatch coaming, UT weld  

• Offshore Supply Vessels (OSV) — UTG, MPI, DPT — all structural and mechanical NDT  

• LPG / Chemical Tankers — UT scanning tanks, MPI nozzle welds, DPT fittings  

• Dredgers & Barges — Hull plate UTG, weld inspection, condition survey  

• Offshore Rigs & Jack up Rigs — ACFM, MPI, UT — structural weld and joint inspection  

Why Choose AIMMS Group for NDT at Fujairah? 

ABS , DNV & IRS Approved for UTM & NDT Inspection 
Our NDT services are formally approved by ABS, DNV & IRS, accepted by all IACS member classification societies operating in UAE waters. 

24-Hour Mobilisation 
We maintain a permanent team and equipment depot serving Fujairah port and anchorage. 
Standard mobilization time: 12–24 hours from enquiry confirmation. 

Certified Technicians 
All inspectors hold ASNT NDT Level II or PCN Level II certification with valid offshore safety certification (BOSIET/HUET) and UAE port authority access. 

Full Documentation 

Inspection reports issued in class-approved format, including sketch plans, thickness readings, photographic records, and dimensional sketches — delivered digitally within 24 hours of inspection. 

Request NDT Inspection in Fujairah 

Contact our Fujairah-based operations team directly for the fastest response. Provide your vessel name, IMO number, and scope of inspection required.